Explore Our
Dome & Tray
Molds
Learn How
To Use
Our Molds
Featured Products
Dome Molds
Make memories last by transforming your favorite photos into one-of-a-kind custom paper weights or create your own personalized trinkets using Alumilite’s Mold-It Cast-It Dome Molds. Encapsulate photos, flowers and greenery, buttons, glitter, confetti, small figures, and more with these dome casting molds. Use them to make the perfect gift for friends and family or cast a memorable keepsake to treasure for years.
Tray Molds
Use Alumilite’s Molding & Casting Tray Molds to create custom shallow molds that require a flat bottom. Replicate custom ornaments, embellishments, game pieces, filigree, and more or cast your own glossy resin pieces from scratch!
Project How-to
-
Casting Instructions
-
Molding Instructions
Note: Prior to use with resin, coat molds lightly with Amazing Mold Release for easy de-molding.
Step 1: Remove the molds from the packaging and ensure the insides are clean. You may use isopropyl alcohol to remove any dust or debris, then allow to dry fully.
Step 2: Prepare the mold with Amazing Mold Release by lightly coating the inside surfaces. This will ensure that the epoxy resin used will not adhere to the mold.
Step 3: Add the inclusions and addives you plan to use, into your epoxy then slowly pour that mixture into the mold.
Step 4: Allow the project to cure according to the epoxy's instructions (typically 24 hours or less) and remove.
Ideal for use with: Amazing Clear Cast & Amazing Clear Cast Plus epoxy products.
Step 1: Remove the molds from the packaging and ensure the insides are clean. You may use isopropyl alcohol to remove any dust or debris, then allow to dry fully.
Step 2: Insert your master into the mold. For best results, adhere the master in the mold with hot glue.
Step 3: Slowly pour your mixed silicone into the mold, making sure not to pour directly on top of the master(s). For best results, allow the silicone to naturally cover the master(s).
Step 4: Allow the silicone to cure according to the product's instructions, then remove from the mold.
Step 5: Clean up the edges of the silicone and remove any flashing that seeped under the master during the creation process. This is best done with the master still inside the mold.
Ideal for use with: Amazing Mold Maker and Amazing Mold Putty
Join our Community
Tag your content with #Alumilite or @alumiliteco
for a chance to be featured