"makes things easier than trying to pouring it from the gallon jugs"
1 fl.oz. Liquid Hand Pumps for Resin Bottles
$11.99
/
Shipping calculated at checkout.
When resins are used often, hand pump dispensers can assist with easier dispensing and less mess. These dispensers fit our half gallon* and 1 gallon bottles. One complete press of the pump yields approximately 1 fluid ounce of product.
Please note that thinner resins such as urethanes pump much easier, while more viscous resins such as epoxy take more effort to dispense. In addition, while these pumps make for easier dispensing, they may not be accurate enough for some resins. Measuring pump volume dispensed should be checked to ensure proper mix ratio and should be done on a regular basis.
✅ Contains: 2 pumps with closure cap
*When used with half gallon bottles, draw tube must be cut shorter to fit completely into the bottle. Cut on an angle ¼ inch from bottom of bottle.
Pumps used with urethane resins may need to be replaced more frequently due to moisture sensitivity & interaction with the pump.
Downloadable Resources
Overall rating: 3.8888888 / 5 from 9 reviews.
AI Generated Review Summary
Summary topics
Review topics: [].
Review highlights
Reviews
Drip, Drip, Drip
"I would not buy these again. They drip down the side of the large plastic containers. You can put the caps on the end of the spouts, but when you take them off they drip until the spouts are empty. The caps eventually stuck to the end of the spouts and made the whole pump useless. It's much easier to pour the resin into smaller cups and put the rest back in by hand."
Pump it
"Great pumps, if you do not want them to drip, close them by pumping them all the way down and twisting them so they stay closed. Some excess will still drip even with the caps on. This was my experience and others may not have the same experience."
Hand pump
"I really wanted this to work, it would have been such a huge help. However, it was too hard to pump the resin, was not stable, moved around making it hard to collect. In the end I went back to the old way of pouring it out. So sorry, it was a great idea."
Very well made. Easy to use.
"I’m impressed with all Alumilite products. This pump is no exception. I’m new to epoxy, I have learned from watching many Jake Thompson and Zac Higgins videos on YouTube."
Convenient
"I use the Resin for making fishing lures and the pumps really help to expedite the process."
Worth it for large bottles!
"Have made pouring resin so much easier!"
Cleans your hands in a
"Cleans your hands in a jiffy."
Not impresed
"I wish they were easier to use. . . One was not stable and other took too many pushes for the thicker resin. . I am going back to pouring in containers. . . Also I think the resin is exposed to air with the pumps. . . just my opinion."
Q&A
Overall rating: 3.8888888 / 5 from 9 reviews.
AI Generated Review Summary
Summary topics
Review topics: [].
Review highlights
Reviews
"makes things easier than trying to pouring it from the gallon jugs"
Drip, Drip, Drip
"I would not buy these again. They drip down the side of the large plastic containers. You can put the caps on the end of the spouts, but when you take them off they drip until the spouts are empty. The caps eventually stuck to the end of the spouts and made the whole pump useless. It's much easier to pour the resin into smaller cups and put the rest back in by hand."
Pump it
"Great pumps, if you do not want them to drip, close them by pumping them all the way down and twisting them so they stay closed. Some excess will still drip even with the caps on. This was my experience and others may not have the same experience."
Hand pump
"I really wanted this to work, it would have been such a huge help. However, it was too hard to pump the resin, was not stable, moved around making it hard to collect. In the end I went back to the old way of pouring it out. So sorry, it was a great idea."
Very well made. Easy to use.
"I’m impressed with all Alumilite products. This pump is no exception. I’m new to epoxy, I have learned from watching many Jake Thompson and Zac Higgins videos on YouTube."
Convenient
"I use the Resin for making fishing lures and the pumps really help to expedite the process."
Worth it for large bottles!
"Have made pouring resin so much easier!"
Cleans your hands in a
"Cleans your hands in a jiffy."
Not impresed
"I wish they were easier to use. . . One was not stable and other took too many pushes for the thicker resin. . I am going back to pouring in containers. . . Also I think the resin is exposed to air with the pumps. . . just my opinion."
Q&A
Overall rating: 3.8888888 / 5 from 9 reviews.
AI Generated Review Summary
Summary topics
Review topics: [].
Review highlights
Reviews
"makes things easier than trying to pouring it from the gallon jugs"
Drip, Drip, Drip
"I would not buy these again. They drip down the side of the large plastic containers. You can put the caps on the end of the spouts, but when you take them off they drip until the spouts are empty. The caps eventually stuck to the end of the spouts and made the whole pump useless. It's much easier to pour the resin into smaller cups and put the rest back in by hand."
Pump it
"Great pumps, if you do not want them to drip, close them by pumping them all the way down and twisting them so they stay closed. Some excess will still drip even with the caps on. This was my experience and others may not have the same experience."
Hand pump
"I really wanted this to work, it would have been such a huge help. However, it was too hard to pump the resin, was not stable, moved around making it hard to collect. In the end I went back to the old way of pouring it out. So sorry, it was a great idea."
Very well made. Easy to use.
"I’m impressed with all Alumilite products. This pump is no exception. I’m new to epoxy, I have learned from watching many Jake Thompson and Zac Higgins videos on YouTube."
Convenient
"I use the Resin for making fishing lures and the pumps really help to expedite the process."
Worth it for large bottles!
"Have made pouring resin so much easier!"
Cleans your hands in a
"Cleans your hands in a jiffy."
Not impresed
"I wish they were easier to use. . . One was not stable and other took too many pushes for the thicker resin. . I am going back to pouring in containers. . . Also I think the resin is exposed to air with the pumps. . . just my opinion."
Q&A
Overall rating: 3.8888888 / 5 from 9 reviews.
AI Generated Review Summary
Summary topics
Review topics: [].
Review highlights
Reviews
"makes things easier than trying to pouring it from the gallon jugs"
Drip, Drip, Drip
"I would not buy these again. They drip down the side of the large plastic containers. You can put the caps on the end of the spouts, but when you take them off they drip until the spouts are empty. The caps eventually stuck to the end of the spouts and made the whole pump useless. It's much easier to pour the resin into smaller cups and put the rest back in by hand."
Pump it
"Great pumps, if you do not want them to drip, close them by pumping them all the way down and twisting them so they stay closed. Some excess will still drip even with the caps on. This was my experience and others may not have the same experience."
Hand pump
"I really wanted this to work, it would have been such a huge help. However, it was too hard to pump the resin, was not stable, moved around making it hard to collect. In the end I went back to the old way of pouring it out. So sorry, it was a great idea."
Very well made. Easy to use.
"I’m impressed with all Alumilite products. This pump is no exception. I’m new to epoxy, I have learned from watching many Jake Thompson and Zac Higgins videos on YouTube."
Convenient
"I use the Resin for making fishing lures and the pumps really help to expedite the process."
Worth it for large bottles!
"Have made pouring resin so much easier!"
Cleans your hands in a
"Cleans your hands in a jiffy."
Not impresed
"I wish they were easier to use. . . One was not stable and other took too many pushes for the thicker resin. . I am going back to pouring in containers. . . Also I think the resin is exposed to air with the pumps. . . just my opinion."
Q&A
Overall rating: 3.8888888 / 5 from 9 reviews.
AI Generated Review Summary
Summary topics
Review topics: [].
Review highlights
Reviews
"makes things easier than trying to pouring it from the gallon jugs"
Drip, Drip, Drip
"I would not buy these again. They drip down the side of the large plastic containers. You can put the caps on the end of the spouts, but when you take them off they drip until the spouts are empty. The caps eventually stuck to the end of the spouts and made the whole pump useless. It's much easier to pour the resin into smaller cups and put the rest back in by hand."
Pump it
"Great pumps, if you do not want them to drip, close them by pumping them all the way down and twisting them so they stay closed. Some excess will still drip even with the caps on. This was my experience and others may not have the same experience."
Hand pump
"I really wanted this to work, it would have been such a huge help. However, it was too hard to pump the resin, was not stable, moved around making it hard to collect. In the end I went back to the old way of pouring it out. So sorry, it was a great idea."
Very well made. Easy to use.
"I’m impressed with all Alumilite products. This pump is no exception. I’m new to epoxy, I have learned from watching many Jake Thompson and Zac Higgins videos on YouTube."
Convenient
"I use the Resin for making fishing lures and the pumps really help to expedite the process."
Worth it for large bottles!
"Have made pouring resin so much easier!"
Cleans your hands in a
"Cleans your hands in a jiffy."
Not impresed
"I wish they were easier to use. . . One was not stable and other took too many pushes for the thicker resin. . I am going back to pouring in containers. . . Also I think the resin is exposed to air with the pumps. . . just my opinion."
Q&A
Overall rating: 3.8888888 / 5 from 9 reviews.
AI Generated Review Summary
Summary topics
Review topics: [].
Review highlights
Reviews
"makes things easier than trying to pouring it from the gallon jugs"
Drip, Drip, Drip
"I would not buy these again. They drip down the side of the large plastic containers. You can put the caps on the end of the spouts, but when you take them off they drip until the spouts are empty. The caps eventually stuck to the end of the spouts and made the whole pump useless. It's much easier to pour the resin into smaller cups and put the rest back in by hand."
Pump it
"Great pumps, if you do not want them to drip, close them by pumping them all the way down and twisting them so they stay closed. Some excess will still drip even with the caps on. This was my experience and others may not have the same experience."
Hand pump
"I really wanted this to work, it would have been such a huge help. However, it was too hard to pump the resin, was not stable, moved around making it hard to collect. In the end I went back to the old way of pouring it out. So sorry, it was a great idea."
Very well made. Easy to use.
"I’m impressed with all Alumilite products. This pump is no exception. I’m new to epoxy, I have learned from watching many Jake Thompson and Zac Higgins videos on YouTube."
Convenient
"I use the Resin for making fishing lures and the pumps really help to expedite the process."
Worth it for large bottles!
"Have made pouring resin so much easier!"
Cleans your hands in a
"Cleans your hands in a jiffy."
Not impresed
"I wish they were easier to use. . . One was not stable and other took too many pushes for the thicker resin. . I am going back to pouring in containers. . . Also I think the resin is exposed to air with the pumps. . . just my opinion."
