Makes gallon jugs easy to use
"The pump dispenser allows for ease of use with the gallon jugs. No need to lift the jug. Just place your cup under the pump."
When resins are used often, hand pump dispensers can assist with easier dispensing and less mess. These dispensers fit our half gallon* and 1 gallon bottles. One complete press of the pump yields approximately 1 fluid ounce of product.
Please note that thinner resins such as urethanes pump much easier, while more viscous resins such as epoxy take more effort to dispense. In addition, while these pumps make for easier dispensing, they may not be accurate enough for some resins. Measuring pump volume dispensed should be checked to ensure proper mix ratio and should be done on a regular basis.
*When used with half gallon bottles, draw tube must be cut shorter to fit completely into the bottle. Cut on an angle ¼ inch from bottom of bottle.
Pumps used with urethane resins may need to be replaced more frequently due to moisture sensitivity & interaction with the pump.
Contains: 1 pump
Each pump sold separately. Pump style may vary from picture shown.
Overall rating: 3.4 / 5 from 15 reviews.
Review topics: [].
"The pump dispenser allows for ease of use with the gallon jugs. No need to lift the jug. Just place your cup under the pump."
"It's great for small batches of resin. No measuring required."
"My last order was for the 1 Gallon part A and 1 Gallon part B. IMMEDIATELY after receiving the order, I emailed you and told you that one bottle was leaking. I never got a response, a refund, or an offer to replace, so I could never use the not-so-cheap one-gallon product. That turned me away as a customer because I had to find a way to recoup my loss"
"Normally these pumps work well but this set had given me issues with air bubbles and inconsistent pump volumes. Ive had to measure each pump every time when Normally I havent had to worry about inconsistent volumes."
"I like most of the items I have bought from Alumilite, but this item is not worth buying. I purchased two, one for each gallon bottle, and both pumps failed within a short time. The plastic is too flimsy and cracked after a few uses. Better to pour and forget the pump."
"I purchase 5 gallon jugs of RC-3 and keep spare pumps for various color mixes I've made. These are a standard fit for nearly every 1'gal jug made. Perfect!"
"Pump dispenser continues to be topnotch."
"Works great on part A, got clogged half way through part B."
"Works exactly as intended. Never had a problem. Works every time without fail"
"I really enjoyed having the pumps initially but after only 7 months and probably 15 times using it, the pump is now broken so I am having to pour out of gallon size bottles which is not easy. Really don't want to spend another $10 for one pump so might have to look at other options."
Overall rating: 3.4 / 5 from 15 reviews.
Review topics: [].
"The pump dispenser allows for ease of use with the gallon jugs. No need to lift the jug. Just place your cup under the pump."
"It's great for small batches of resin. No measuring required."
"My last order was for the 1 Gallon part A and 1 Gallon part B. IMMEDIATELY after receiving the order, I emailed you and told you that one bottle was leaking. I never got a response, a refund, or an offer to replace, so I could never use the not-so-cheap one-gallon product. That turned me away as a customer because I had to find a way to recoup my loss"
"Normally these pumps work well but this set had given me issues with air bubbles and inconsistent pump volumes. Ive had to measure each pump every time when Normally I havent had to worry about inconsistent volumes."
"I like most of the items I have bought from Alumilite, but this item is not worth buying. I purchased two, one for each gallon bottle, and both pumps failed within a short time. The plastic is too flimsy and cracked after a few uses. Better to pour and forget the pump."
"I purchase 5 gallon jugs of RC-3 and keep spare pumps for various color mixes I've made. These are a standard fit for nearly every 1'gal jug made. Perfect!"
"Pump dispenser continues to be topnotch."
"Works great on part A, got clogged half way through part B."
"Works exactly as intended. Never had a problem. Works every time without fail"
"I really enjoyed having the pumps initially but after only 7 months and probably 15 times using it, the pump is now broken so I am having to pour out of gallon size bottles which is not easy. Really don't want to spend another $10 for one pump so might have to look at other options."
Overall rating: 3.4 / 5 from 15 reviews.
Review topics: [].
"The pump dispenser allows for ease of use with the gallon jugs. No need to lift the jug. Just place your cup under the pump."
"It's great for small batches of resin. No measuring required."
"My last order was for the 1 Gallon part A and 1 Gallon part B. IMMEDIATELY after receiving the order, I emailed you and told you that one bottle was leaking. I never got a response, a refund, or an offer to replace, so I could never use the not-so-cheap one-gallon product. That turned me away as a customer because I had to find a way to recoup my loss"
"Normally these pumps work well but this set had given me issues with air bubbles and inconsistent pump volumes. Ive had to measure each pump every time when Normally I havent had to worry about inconsistent volumes."
"I like most of the items I have bought from Alumilite, but this item is not worth buying. I purchased two, one for each gallon bottle, and both pumps failed within a short time. The plastic is too flimsy and cracked after a few uses. Better to pour and forget the pump."
"I purchase 5 gallon jugs of RC-3 and keep spare pumps for various color mixes I've made. These are a standard fit for nearly every 1'gal jug made. Perfect!"
"Pump dispenser continues to be topnotch."
"Works great on part A, got clogged half way through part B."
"Works exactly as intended. Never had a problem. Works every time without fail"
"I really enjoyed having the pumps initially but after only 7 months and probably 15 times using it, the pump is now broken so I am having to pour out of gallon size bottles which is not easy. Really don't want to spend another $10 for one pump so might have to look at other options."
Overall rating: 3.4 / 5 from 15 reviews.
Review topics: [].
"The pump dispenser allows for ease of use with the gallon jugs. No need to lift the jug. Just place your cup under the pump."
"It's great for small batches of resin. No measuring required."
"My last order was for the 1 Gallon part A and 1 Gallon part B. IMMEDIATELY after receiving the order, I emailed you and told you that one bottle was leaking. I never got a response, a refund, or an offer to replace, so I could never use the not-so-cheap one-gallon product. That turned me away as a customer because I had to find a way to recoup my loss"
"Normally these pumps work well but this set had given me issues with air bubbles and inconsistent pump volumes. Ive had to measure each pump every time when Normally I havent had to worry about inconsistent volumes."
"I like most of the items I have bought from Alumilite, but this item is not worth buying. I purchased two, one for each gallon bottle, and both pumps failed within a short time. The plastic is too flimsy and cracked after a few uses. Better to pour and forget the pump."
"I purchase 5 gallon jugs of RC-3 and keep spare pumps for various color mixes I've made. These are a standard fit for nearly every 1'gal jug made. Perfect!"
"Pump dispenser continues to be topnotch."
"Works great on part A, got clogged half way through part B."
"Works exactly as intended. Never had a problem. Works every time without fail"
"I really enjoyed having the pumps initially but after only 7 months and probably 15 times using it, the pump is now broken so I am having to pour out of gallon size bottles which is not easy. Really don't want to spend another $10 for one pump so might have to look at other options."
Overall rating: 3.4 / 5 from 15 reviews.
Review topics: [].
"The pump dispenser allows for ease of use with the gallon jugs. No need to lift the jug. Just place your cup under the pump."
"It's great for small batches of resin. No measuring required."
"My last order was for the 1 Gallon part A and 1 Gallon part B. IMMEDIATELY after receiving the order, I emailed you and told you that one bottle was leaking. I never got a response, a refund, or an offer to replace, so I could never use the not-so-cheap one-gallon product. That turned me away as a customer because I had to find a way to recoup my loss"
"Normally these pumps work well but this set had given me issues with air bubbles and inconsistent pump volumes. Ive had to measure each pump every time when Normally I havent had to worry about inconsistent volumes."
"I like most of the items I have bought from Alumilite, but this item is not worth buying. I purchased two, one for each gallon bottle, and both pumps failed within a short time. The plastic is too flimsy and cracked after a few uses. Better to pour and forget the pump."
"I purchase 5 gallon jugs of RC-3 and keep spare pumps for various color mixes I've made. These are a standard fit for nearly every 1'gal jug made. Perfect!"
"Pump dispenser continues to be topnotch."
"Works great on part A, got clogged half way through part B."
"Works exactly as intended. Never had a problem. Works every time without fail"
"I really enjoyed having the pumps initially but after only 7 months and probably 15 times using it, the pump is now broken so I am having to pour out of gallon size bottles which is not easy. Really don't want to spend another $10 for one pump so might have to look at other options."
Overall rating: 3.4 / 5 from 15 reviews.
Review topics: [].
"The pump dispenser allows for ease of use with the gallon jugs. No need to lift the jug. Just place your cup under the pump."
"It's great for small batches of resin. No measuring required."
"My last order was for the 1 Gallon part A and 1 Gallon part B. IMMEDIATELY after receiving the order, I emailed you and told you that one bottle was leaking. I never got a response, a refund, or an offer to replace, so I could never use the not-so-cheap one-gallon product. That turned me away as a customer because I had to find a way to recoup my loss"
"Normally these pumps work well but this set had given me issues with air bubbles and inconsistent pump volumes. Ive had to measure each pump every time when Normally I havent had to worry about inconsistent volumes."
"I like most of the items I have bought from Alumilite, but this item is not worth buying. I purchased two, one for each gallon bottle, and both pumps failed within a short time. The plastic is too flimsy and cracked after a few uses. Better to pour and forget the pump."
"I purchase 5 gallon jugs of RC-3 and keep spare pumps for various color mixes I've made. These are a standard fit for nearly every 1'gal jug made. Perfect!"
"Pump dispenser continues to be topnotch."
"Works great on part A, got clogged half way through part B."
"Works exactly as intended. Never had a problem. Works every time without fail"
"I really enjoyed having the pumps initially but after only 7 months and probably 15 times using it, the pump is now broken so I am having to pour out of gallon size bottles which is not easy. Really don't want to spend another $10 for one pump so might have to look at other options."
Your cart is currently empty.
Start Shopping